Suzuki Musical Instrument Corp. HP-97 - Manual (Page 18)

18
KEYBOARD VOICES
TO USE THE LAYER FUNCTION
1.
Press the LAYER button, the currently assigned Layer voice will be shown on the
display, and the LED indicator will turn on.
2. Use the +/YES, –/NO buttons or the Quick Select Voice Buttons to select the
desired Layer voice.
NOTE: The LCD display will show the layer voice number and name, after three
seconds the display will revert to the originally selected main voice.
3. Press the LAYER button again and the LCD display will show the current volume
setting for the LAYER Function.
4. Press the LAYER button again to turn the LAYER function off.
TO SELECT A DIFFERENT VOICE FOR THE LAYER FUNCTION
1.
Press the LAYER button, the currently assigned Layer voice will be shown on the
display, and the LED indicator will turn on.
2. Use the +/YES, –/NO buttons or the Quick Select Voice Buttons to select the
desired Layer voice.
NOTE: You must select the +/YES, –/NO buttons or the Quick Select Voice Buttons
within the three second period that the LAYER voice is displayed on the LCD
screen or else the originally selected LAYER voice will remain engaged.
TO CHANGE THE VOLUME OF THE LAYER VOICE
1.
Press the LAYER Button - Its LED will turn on.
2. Press the LAYER Button a second time and the current Layer Volume level is
shown on the Display LCD.
NOTE: This Layer Volume setting will be displayed on the LCD screen for three
seconds.
3. While the Layer Volume screen is displayed, use the +/YES or the –/NO Buttons
to raise or lower the volume of the selected Layer Instrument Voice. The LCD
Display Screen will show Volume Setting.
TO ADD REVERB TO LAYER VOICE
1.
Press the FUNCTION Button - Its LED will turn on.
2. Press the PAGE Down Button - Until Layer Reverb (LayerRev.Lvl) is shown on the
Display LCD.
3. Press the +/YES Button to display the current Layer Reverb Level and then press
the +/YES or the –/NO Buttons to raise or lower the Layer Reverb level of the
selected Layer Instrument Voice.
TO ADD CHORUS TO LAYER VOICE
1.
Press the FUNCTION Button - Its LED will turn on.
2. Press the PAGE Down Button - Until Layer Chorus (LayerCho.Lvl) is shown on the
Display LCD.
3. Follow step 3 listed above to change the Current Layer Chorus Levels.
LAYER VOICE
,
,
LAYER
LAYER
+ / YES
- / NO
LAYER (DUAL) VOICE - Layer, or dual, refers to an additional voice that is “tone mixed”
with the originally selected keyboard voice. The assigned layer voice will be heard
with the original voice when the layer feature is engaged.