Savin 2535P - Manual (Page 57)

User Tools (System Settings)
46
3
File Transfer
Be sure to make these settings if you are using ScanRouter V2 Lite/Professional.
Note
❒ The optional ScanRouter V2 Professional is required for distributing received
fax documents.
❖ ❖ ❖ ❖ Delivery Server IP Address
Specifies the IP address of the ScanRouter V2 Lite delivery server for distrib-
uting documents or data from the machine.
Note
❒ Default: 000.000.000.000
❒ Press [←
← ← ←] or [→ → → →] to move between each group of three numbers.
❒ If you make a mistake, press the “Clear” key and enter the correct number.
❖ ❖ ❖ ❖ Fax RX File Transmission
• Setting per Line
Specifies whether or not received fax documents should be sent to the
ScanRouter V2 Professional for each of the fax lines.
Note
❒ Default: G3 Port 1/Do not Deliver, G3 Port 2/Do not Deliver, G3 Port 3/Do
not Deliver
• Print at Delivery
Specifies whether or not received fax documents that are sent to the ScanRout-
er V2 Professional should also be printed by the machine at the same time.
Note
❒ Default: No
• File to Deliver
Specifies whether all received fax documents or only received fax docu-
ments that include delivery codes (documents with an ID and F code)
should sent to the ScanRouter V2 Professional.
Note
❒ Default: File with Dlvry Code
• Delivery Failure File (Dlvry Failure File)
If a received fax document cannot be sent to the ScanRouter V2 Profession-
al, the documents is stored in the machine's memory. To print this stored
data select “Print File”, to delete the data select “Delete File”.
Note
❒ If the machine can send data to the ScanRouter V2 Professional, data is
sent automatically.
❒ If you delete the data, you will not be able to distribute or print the data.
AdonisC2-sysEN122F_FM.book Page 46 Thursday, February 1, 2001 1:46 PM