SIIG 1394 User Manual
Page 3
3
Driver Installation
Please make sure the board is installed before proceeding
with driver installation.
Windows 98SE
1.
When Windows boots up, a New Hardware Found
dialog box should appear and the OHCI Compliant
IEEE 1394 Host Controller is identified.
2.
At the Add New Hardware Wizard window, click
Next.
3.
Choose Search for the best driver for your device,
and click Next.
4.
Clear all check boxes, click Next, Next, and Next.
NOTE: If prompted for the Windows 98SE CD,
insert it, then click OK.
5.
Click Finish to complete driver installation.
Windows ME
1.
At the Add New Hardware Wizard, choose
Automatic search for a better driver
(Recommended), then click Next.
2.
Click Finish and restart Windows to complete
driver installation.
Windows 2000/XP
Windows 2000 and XP will automatically detect and
install the correct driver for the 1394 PCI adapter.
- Network Card (6 pages)
- 04-0444A (8 pages)
- Transport GX21 B5350 (70 pages)
- 5.1 (20 pages)
- ID-SC0711-S1 (24 pages)
- RS-232 (12 pages)
- 04-0625A (8 pages)
- FIERY EX2101 (8 pages)
- SATA II-150 (16 pages)
- II-150 (12 pages)
- 04-0288E (12 pages)
- 04-0629A (12 pages)
- 04-0192A (4 pages)
- Network Device EVTEK-5103 (2 pages)
- 04-0417C (12 pages)
- FREEFLOW 701P48438 (20 pages)
- CYBER 2S1P (12 pages)
- PCI 2S (10 pages)
- 133 (12 pages)
- 7.1 (12 pages)
- 04-0631A (20 pages)
- 5090S (12 pages)
- 4110 (8 pages)
- FIERY 700 (8 pages)
- 04-0265F (16 pages)
- 04-0205F (8 pages)
- 5052 (8 pages)
- 700 (12 pages)
- 04-0418A (20 pages)
- 04-0322C (16 pages)
- PCI 4S (10 pages)
- 04-0343C (12 pages)
- UltraATA 133 (26 pages)
- I/O Expander 2S (12 pages)
- 04-0725A (12 pages)
- 04-0207A (8 pages)
- 104-0561C (12 pages)
- 04-0373C (36 pages)
- CYBER 1S1P PCI (12 pages)
- 04-0589A (8 pages)
- 04-0263E (8 pages)
- 4590 (8 pages)
- 04-0341D (12 pages)
- 04-0322B (12 pages)
- Computer Drive (8 pages)