Scotch Brand 5.1.10 - Manual (Page 119)

scotchfmeshgeomloadscot (doubleprecision (*) meshdat,
doubleprecision (*) geomdat,
integer meshfildes,
integer geomfildes,
character (*) string)
Description
The SCOTCH meshGeomLoadScot routine fills the SCOTCH Mesh and SCOTCH
Geom
structures pointed to by meshptr and geomptr with the source mesh
description and node geometry data available from streams meshstream and
geomstream
in the Scotch mesh and geometry formats (see sections 5.2
and 5.3, respectively). The string field is not used.
Fortran users must use the PXFFILENO or FNUM functions to obtain the numbers
of the Unix file descriptors meshfildes and geomfildes associated with the
logical units of the mesh and geometry files.
Return values
SCOTCH meshGeomLoadScot returns 0 if the mesh topology and node geometry
have been successfully allocated and filled with the data read, and 1 else.
7.11.11 SCOTCH meshGeomSaveScot
Synopsis
int SCOTCH meshGeomSaveScot (const SCOTCH Mesh * meshptr,
const SCOTCH Geom * geomptr,
FILE * meshstream,
FILE * geomstream,
const char * string)
scotchfmeshgeomsavescot (doubleprecision (*) meshdat,
doubleprecision (*) geomdat,
integer meshfildes,
integer geomfildes,
character (*) string)
Description
The SCOTCH meshGeomSaveScot routine saves the contents of the SCOTCH
Mesh
and SCOTCH Geom structures pointed to by meshptr and geomptr to
streams meshstream and geomstream, in the Scotch mesh and geometry
formats (see sections 5.2 and 5.3, respectively). The string field is not used.
Fortran users must use the PXFFILENO or FNUM functions to obtain the numbers
of the Unix file descriptors meshfildes and geomfildes associated with the
logical units of the mesh and geometry files.
Return values
SCOTCH meshGeomSaveScot returns 0 if the mesh topology and node geometry
have been successfully written to meshstream and geomstream, and 1 else.
119