Sharp UX-465L - Manual (Page 100)

Polling (Requesting a Fax Transmission)
98
Being polled (polling
standby)
To let another fax machine poll your
fax, press the RECEPTION MODE
key to set the reception mode to FAX
and load the document(s).
Transmission will take place when
the other fax machine calls your
machine and activates polling.
Automatic reception is possible while
your fax is on polling standby.
Polling security
Polling Security allows you to prevent
unauthorized polling of your machine.
When this function is turned on,
polling will only take place when the
fax number of the polling fax machine
has been entered in your machine's
list of permitted fax numbers (called
"passcode numbers"). The number of
the polling fax must also be correctly
programmed into itself for
identification.
1
Press these keys:
2
Press 1 to turn polling security on,
or 2 to turn it off.
START/MEMORY
FUNCTION
Press 3
times
3
SECURITY SELECT
1 2 or
ON OFF
3
Press the START/MEMORY key
and then the STOP key.
STOP
2
Press Rapid Key 04/POLL.
•
If you used the handset, replace it
when POLLING appears in the
display. Reception will begin.
04/POLL
To use Polling Security, follow the
steps below to turn the function on,
and then enter permitted numbers as
shown on the following page.