Woodstock Shop Fox Fence W1410 - Manual (Page 19)

-18- Shop Fox ® Fence
B. BOARD BUDDIES ®
The T-slot in the top of the Shop Fox ® Fence has
been customized to accept another popular product
from Woodstock International: Board Buddies ® .
These one directional, spring loaded hold-down
wheels keep material pressed firmly against the
table and fence. They are fully adjustable and
non-marking. Be sure to request the W1103 T-
nuts separately from your Woodstock dealer for
mounting Board Buddies ® to your fence. Board
Buddies ® are a great addition to any fence system!
For the location of your nearest Woodstock dealer,
call Woodstock International at (360) 734-3482.
SECTION IV: OPERATIONS
To operate this, or any tool, safely and efficiently,
it is essential to become as familiar with its char-
acteristics as possible. Take as much time as
necessary to become acquainted with the W1410
Shop Fox ® Fence. The time you invest before you
begin to use it will be time well spent.
While most safety measures are generally uni-
versal, Woodstock reminds you that each work
environment is different and safety rules should be
considered as they apply to your situation.
The Item W1410 is specifically designed for use
on table saws with 27" deep table surface. It must
never be modified or used for any other purpose.
Modifications or improper use of this tool will
void all warranties. If you are not sure about
operating the Shop Fox ® Fence, DO NOT USE IT
until you have resolved any questions or concerns
you might have. Please contact Woodstock at the
phone or address listed on page 2.
A. FINE POSITIONING
Either one of the two front rollers can be used
for extremely fine fence adjustments. Place your
thumb against the knurled outer surface of one of
the front rollers to rotate it. Figure 26. Moving the
fence in this manner yields excellent control and
accuracy.
Figure 26. Fine fence adjustment.