Specifications – Sennheiser EK 500 User Manual
Page 27

27
Specifications
RF characteristics
Modulation
wideband FM
Frequency ranges
518–554, 626–662,
740–776, 786–822,
830–866 MHz
Transmission frequencies
8 channel banks with up
to 20 factory-preset
channels each
1 channel bank with up to
20 freely selectable
channels (1440
frequencies, tunable in
steps of 25 kHz)
Switching bandwidth
36 MHz
Nominal/peak deviation
± 24 kHz / ± 48 kHz
Frequency stability
≤ ± 15 ppm
RF output power at 50 Ω
typ. 30 mW
AF characteristics
Noise reduction system
Sennheiser
HDX
AF frequency response
40–18,000 Hz
S/N ratio (at 1 mV and peak
deviation)
≥ 110 dB(A)
THD (at nominal deviation
and 1 kHz)
≤ 0.9 %
Max. input voltage
(at peak deviation)
Microphone
1.8 V
rms,
unbalanced
Line
2.9 V
rmsf
Input impedance
Microphone
10 kΩ, unbalanced
Line
1 MΩ
Overall unit
Temperature range
– 10 °C to + 55 °C
Power supply
2 AA size batteries, 1.5 V
or BA 2015 accupack
Nominal voltage
2.4 V
Max. power consumption at
nominal voltage
≤ 170 mA
Power consumption with
switched-off transmitter
≤ 250 μA
Operating time (with batteries)
≥
8 h
Operating time (with BA 2015
accupack)
≥
8 h
Dimensions [mm]
82 x 64 x 24
Weight (incl. batteries)
approx. 158 g