JVC HD-Z56RX5 - Manual (Page 7)

6
Setting up your TV
LT-Z70/56RX5 / LCT1911-001A / English
ENGLISH
Initial settings (Setup tour)
When the TV is first turned on, it goes into the initial settings mode,
and you will see the JVC logo. Follow the instructions on the screen
display to make the initial settings.
1 Make sure to set the VCR/TV/DVD switch on the remote
control to the TV position
• You cannot turn the TV on when the VCR/TV/DVD switch is
set to the DVD position.
2 Press the POWER button on the TV or # (standby/on)
button on the remote control
The TV turns on from standby mode and the JVC logo is
displayed.
• Check that the AC plug on the power cord from the TV is
connected to AC outlet.
• If the JVC logo does not appear this is because your TV has
already been turned on for the first time:
use the “LANGUAGE”, “TELETEXT LANGUAGE” and
“AUTO PROGRAM” functions to make the initial settings. For
details, see “SET UP menu” on page 21.
3 Press the a button
The LANGUAGE menu appears.
4 Press the 6 buttons to choose ENGLISH. Then press
the a button
The TELETEXT LANGUAGE menu appears. Set the teletext
language group that corresponds to the language of the teletext
programme that you want to watch.
For details, see “TELETEXT LANGUAGE” on page 23.
5 Press the 6 buttons to choose a group. Then press
the a button
The AUTO PROGRAM function starts. The TV channels you
receive are automatically stored in the programme numbers (PR)
list.
• To stop the AUTO PROGRAM function, press the a button.
6 After the TV channels have been registered in the
programme numbers (PR), the EDIT menu appears
• You can proceed to edit the programme numbers (PR) list using
the EDIT/MANUAL function. For details, see “EDIT/
MANUAL” on page 21.
• If a TV channel you want to view is not stored in the
programme numbers (PR) list, you can register it using the
MANUAL function. For details, see “EDIT/MANUAL” on
page 21.
• The AUTO PROGRAM function does not store a TV channel
to the programme number PR 0 (AV).
• If you do not need to use the EDIT/MANUAL function, press
the a button to close the EDIT menu.
Now, setting up is complete.
Please enjoy your new JVC TV!
6 buttons
# button
VCR/TV/
DVD switch
LAMP/PROGRAM POWER
LAMP
POWER
POWER button
OK
GROUP-1
> TELETEXT LANGUAGE
GROUP-2
GROUP-3
GROUP-4
CH
>>
14%
OK
28
AUTO PROGRAM
>
PR ID
AV
OK
DELETE
MANUAL ID
MOVE
INSERT
CH/CC
EDIT
02
03
05
04
06
07
08
09
01
HD-Z70&56RX5_Eng.book Page 6 Wednesday, August 24, 2005 10:30 AM