JVC HD-Z56RX5 - Manual (Page 23)

22
SET UP menu
LT-Z70/56RX5 / LCT1911-001A / English
ENGLISH
„ MOVE
1 Press the 6 buttons to choose a TV channel
2 Press the 3 button to start the MOVE function
3 Press the 6 buttons to choose a new programme
number (PR)
To cancel the MOVE function:
Press the b button.
4 Press the 2 button to change the programme number
(PR) of a TV channel to a new programme number (PR)
„ DELETE
1 Press the 6 buttons to choose a TV channel
2 Press the yellow button to delete the TV channel
The TV channel is deleted from the programme numbers (PR) list.
„ ID
1 Press the 6 buttons to choose a TV channel
2 Press the red button to start the ID function
3 Enter a channel name (ID). Press the 6 buttons to
choose a character. Press the 5 buttons to move the
cursor
To cancel the ID function:
Press the b button.
4 Press the a button to give a channel name to a TV
channel
Before performing INSERT operation
• A CH/CC number unique to this TV and corresponding to the
Channel number of a TV channel is required. Find the
corresponding CH/CC number from a table “Troubleshooting” on
page 26 based on the Channel number of the TV channel.
„ INSERT
1 Press the 6 buttons to choose a programme number
(PR) for which you will register a new TV channel
2 Press the green button to start the INSERT function
3 Press the 6 buttons to choose “CC” or “CH”
according to the CH/CC number of the TV channel
To cancel the INSERT function:
Press the b button.
4 Press the number buttons to enter the remaining CH/CC
number
The TV shifts to registration mode. When the registration is
completed, the picture of the TV channel appears on the screen.
• The CH/CC number is a number given to each broadcast
frequency that carries a TV channel. If the TV cannot detect the
TV channel corresponding to the broadcast frequency indicated
by the CH/CC number, a “no-signal” picture appears.
„ MANUAL
1 Press the 6 buttons to choose a programme number
(PR) for a new TV channel
2 Press the blue button to activate the MANUAL function
At the right side following the CH/CC number, the SYSTEM
(sound system) of the TV channel appears.
To cancel the MANUAL function:
Press the b button.
3 Press the 3 button to choose the SYSTEM (sound
system) for a TV channel you want to register
• For the sound systems in each country or region, refer to the
table below:
4 Press the green or red button to search for a TV channel
Scanning stops when the TV finds a TV channel. Then the TV
channel is displayed.
5 Press the green or red button repeatedly until the TV
channel you want appears
If the TV channel reception is poor:
Press the blue or yellow button to fine-tune the TV channel.
If you cannot hear the normal sound even when the
picture of the TV channel appears normally:
The SYSTEM setting is wrong. Press the 3 button and choose a
SYSTEM that has normal sound.
6 Press the a button and register the TV channel to a
Programme number (PR)
The normal EDIT menu is resumed.
CH 21
>
OK
CH/CC PR ID
STORE
EDIT
>
OK
CH/CC PR ID
M
EDIT
>
CH/CC PR ID
0 9 OK
CH/CC
EDIT
Area Country or Region System
Asia,
Middle
East
Bahrain, Kuwait, Oman, Qatar, United Arab Emirates,
Yemen, etc.
Indonesia, Malaysia, Singapore, Thailand, India, etc.
B/G
China, Vietnam, etc. D/K
Hong Kong, etc. I
Islamic Republic of Iran, Lebanon, Saudi Arabia, etc. B/G
Philippines, Taiwan, Myanmar, etc. M
Europe
Russia, etc. D/K
Czech Republic, Poland, etc. D/K
Germany, Holland, Belgium, etc. B/G
UK, etc. I
Oceania Australia, New Zealand, etc. B/G
Africa
Republic of South Africa, etc. I
Nigeria, etc. B/G
Egypt, Morocco, etc. B/G
>
CH/CC PR ID
OK SYSTEM
FINE+
FINE- SEARCH+
SEARCH-
(B / G)
MANUAL
HD-Z70&56RX5_Eng.book Page 22 Wednesday, August 24, 2005 10:30 AM