Bar and chain combinations, Saw chain filing and file gauges, Ec-declaration of conformity – Jonsered CS 2171 User Manual
Page 39: Applies to europe only), Technical data
English
– 39
TECHNICAL DATA
Bar and chain combinations
The following combinations are CE approved.
Saw chain filing and file gauges
EC-declaration of conformity
(Applies to Europe only)
Jonsered, SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declares under sole responsibility that the chain saws Jonsered
CS 2165, CS 2171 and CS 2171WH from 2002’s serial numbers and onwards (the year is clearly stated in plain text on the type
plate with subsequent serial number), are in conformity with the requirements of the COUNCIL’S DIRECTIVES:
of June 22, 1998 ”relating to machinery” 98/37/EC, annex IIA.
of May 3, 1989 ”relating to electromagnetic compatibility” 89/336/EEC, and applicable supplements.
of May 8, 2000 ”relating to the noise emissions in the environment” 2000/14/EC.
For information relating to noise emissions, see the chapter Technical data. The following standards have been applied: EN292-2,
CISPR 12:1997, EN608.
Notified body: 0404, SMP Svensk Maskinprovning AB, Fyrisborgsgatan 3, SE-754 50 Uppsala, Sweden, has carried out EC type
examination in accordance with the machinery directive’s (98/37/EC) article 8, point 2c. The certificates for EC type examination
in accordance with annex VI, have the numbers: 404/00/734 – CS 2165, 404/00/733 – CS 2171, CS 2171WH.
In addition, SMP, Svensk Maskinprovning AB, Fyrisborgsgatan 3, SE-754 50 Uppsala, Sweden, has certified conformity with annex
V of the Council’s Directive of May 8, 2000 ”relating to the noise emissions in the environment” 2000/14/EC. The certificates have
the numbers: 01/161/030 – CS 2165, 01/161/029 – CS 2171, CS 2171WH.
The supplied chain saw conforms to the example that underwent EC type examination.
Huskvarna 12 September 2002
Bo Andréasson, Development manager
Bar
Chain
Length, inch
Pitch, inch
Gauge, mm
Max. nose radius
Type
Length, drive links (no.)
15
3/8
1,5
11T
Jonsered H42
56
16
3/8
1,5
11T
Jonsered H42
60
18
3/8
1,5
11T
Jonsered H42
68
20
3/8
1,5
11T
Jonsered H42
72
24
3/8
1,5
11T
Jonsered H42
84
28
3/8
1,5
11T
Jonsered H42
92