beautypg.com

Folding/unfolding the back (figure 3), Fr a m e, Using/storing the strap (figure 2) – Invacare Spyder 1098318 User Manual

Page 21

background image

21

FIGURE 3 - FOLDING/UNFOLDING THE BACK

Back Canes

Back Release Cord

FOLDING/UNFOLDING THE BACK
(FIGURE 3)

WARNING

The back MUST be locked securely in
place BEFORE using the wheelchair. Oth-
erwise, injury or damage may occur.

Unfolding

1. Push/pull the back canes UP towards REAR of wheel-

chair until the back locks in place.

2. Check to make sure the back is securely locked in

place.

Folding

1. Pull the back release cord UP and push the back canes

DOWN towards the seat upholstery.

F

R
A

M

E

FIGURE 2 - USING/STORING THE STRAP

Strap

Hook

Fastening

Strip

Loop

Fastening

Strip

Seat Rails

Rear of Wheelchair

Seat Upholstery

USING/STORING THE STRAP
(FIGURE 2)

WARNING

DO NOT use strap without a seat cushion.
The strap MUST be secured under seat cush-
ion when operating the wheelchair. Other-
wise, strap may become entangled in rear
wheels and injury or damage may occur.

DO NOT use the strap to carry or lift the
wheelchair. Otherwise, injury or damage
may occur.

The strap is provided to secure the folded wheelchair
during transport.

Using the Strap

1. Remove the seat cushion from the wheelchair.

NOTE: Disconnect the back upholstery cover from the seat
upholstery if adjustable tension back upholstery is installed.

2. Pull the strap UP to remove from the fastening strips

on the seat upholstery.

3. Fold the wheelchair. Refer to FOLDING/UNFOLDING

THE WHEELCHAIR in this procedure of the manual.

4. Wrap the strap around the seat rails of the wheel-

chair as shown in FIGURE 2.

5. Press the hook fastening strip at the end of the strap

firmly against the loop fastening strip on the strap to
secure the wheelchair.

Storing the Strap

1. Unfold the wheelchair. Refer to FOLDING/UNFOLDING

THE WHEELCHAIR in this procedure of the manual.

2. Secure the loop fastening strip of the strap to the fasten-

ing strips on the seat upholstery as shown in FIGURE 2.

NOTE: Secure the back upholstery cover to the seat up-
holstery if adjustable tension back upholstery is installed.

3. Install the seat cushion.

Seat Upholstery

Fastening Strips

Strap

FRAME

PROCEDURE 5

This manual is related to the following products: