Mitsumi electronic Pedion Laptop - Manual (Page 39)

OWNER’S HANDBOOK
3 / 4 D i s k e t t e , C D - R O M & A u d i o
To load a CD
1. Turn on the Pedion.
2. Press the CD eject button. The CD tray comes
out about 1.5 cm.
3. Pull the CD tray out to its fullest extent.
4. Set the CD on the CD tray, with the label side
uppermost. Press down on the CD gently but
firmly so that it is held securely in position.
5. Push in the CD tray until it clicks into place.
The CD activity light flashes as the drive comes
up to speed.
To remove a CD normally
1. Ensure that the Pedion is turned on and that the
CD activity light is off.
2. Press the CD eject button.
To remove a CD when there is no
power
1. Ensure that the Pedion is turned off.
2. Insert a thin non-metallic probe, such as a pencil
tip, into the CD emergency eject hole. The CD
tray comes out about 1.5 cm.