Mitsumi electronic Pedion Laptop - Manual (Page 19)

OWNER’S HANDBOOK
6 S a f e t y & R e g u l a t o r y N o t i c e s
Connecting to the AC power supply
Important
Any peripheral equipment that requires an AC power
cord must be earthed.
Use the following guidance to connect the
components together. It is important that you take
each step in the order indicated.
1. Before connecting any components, ensure that
the AC power supply is switched off or
disconnected, and that the computer, and any
peripherals are turned off.
2. Connect the AC adapter to the DC-IN
connector on the rear of the computer.
3. Connect the power cord to the AC adaptor.
4. Plug the computer’s power cord, and the power
cords of any other peripherals, into nearby,
grounded AC power outlets. Switch on or
connect the AC power supply.
5. Turn on any peripherals first, then the
computer.
Power Cable Connections - UK ONLY
This product is supplied with an AC power cord that
has a non-removable moulded plug.
Always replace the fuse with one of the same type and
rating which is BSI or ASTA approved to BS1362.
Always refit the fuse cover, never use the plug with the
fuse cover omitted.