Philips Magnavox 50ML8105D/17 - Manual (Page 37)

Replacing the Internal Lamp
31
English
Rep l aci n g th e I n tern al L amp
To order a replacement lamp, call the Magnavox Customer Care Center at 1-800-705-2000. A Magnavox
associate will be happy to assist you.
The part number for the Magnavox replacement lamp is SP.L6502G001
Warning!
• Turn off the unit and unplug it before replacing the lamp
• Take care that no screws or other foreign metal objects fall into the display interior. Such items
could cause fire or electrical shock.
• Do not remove the lamp except to replace it. Careless handling can cause injury or fire.
• Do not replace the lamp immediately after the display is turned off. The high temperature of the
lamp could cause serious burns. Allow the lamp to cool down at least two hours after turning
off the display
1. Remove the front decorative cover. 2. Unscrew and remove the protective cover from
the lamp module.
3. Loosen the three screws on the lamp unit and
pull the lamp module out.
Note: These screws can be loosened but cannot be
removed from the unit.
4. Replace a new lamp module then screw back the
three screws on the lamp unit.
5. Replace the protective cover and tighten the
screws.
6. Replace the front decorative cover.