Connecting outputs, Connecting, Meridian dsp loudspeakers, connecting – Meridian America 562V.2 User Manual
Page 27
Setting up the multimedia controller
22
Connecting outputs
To connect to a 568 Digital Surround
Processor
562V Multimedia Controller
Digital lead
568 Digital Surround Processor
DIGITAL OUTPUT
MAIN
DIGITAL INPUT
CD/D1
ANALOGUE INPUT
TV/A1
MAIN
ANALOGUE
Audio lead
●
Connect the MAIN digital output of the 562V to the CD/D1
digital input socket of the 568, using high-quality 75
Ω
screened cable.
●
Connect the MAIN analogue output of the 562V to the TV/A1
analogue input socket of the 568, using screened audio cable.
This takes advantage of the high-quality 24-bit analogue-to-
digital converter in the 568 to perform the conversion of
analogue sources.
●
Route the video through the 568 to take advantage of the
on-screen display.
●
Configure the 562V to Type 1; see Choosing standard
●
Configure each 562V source as required; see Setting up
●
Configure the 568 to a 562 Type option; see the 568 Digital
Surround Processor User Guide for more information.
To connect to Meridian DSP
loudspeakers
MAIN
DIGITAL
OUTPUT
COMMS
COMMS
OUTPUT
INPUT
DIGITAL
OUTPUT
DIGITAL INPUTS
2
1
COMMS
OUTPUT INPUT
DIGITAL
OUTPUT
DIGITAL INPUTS
2
1
S5 lead
DSP5000 – Main R
DSP5000 – Main L
562V Multimedia Controller
M5 lead
●
Connect one of the COMMS sockets on the 562V, and the
MAIN digital output, to one of the digital speakers using an
M5 lead.
●
Link the two digital speakers together using an S5 lead as
shown in the illustration.