beautypg.com

Oe/cto0 output enable. provides per channel trista, Ppby parallel port bypass enable. indicates that t, Mc message channel. the message channel contents a – Mitel DISTRIBUTED HYPERCHANNEL MT90840 User Manual

Page 29: Cto1-3 external control lines 1-3. these three bit, Ab8-11 source channel address bits 8-11. these bit, Ab7-0 source channel address bits. in timing modes, In timing mode 4, these 8 bits are used along with, If message mode is selected at tpcm high bits, the, Preliminary information

Oe/cto0 output enable. provides per channel trista, Ppby parallel port bypass enable. indicates that t, Mc message channel. the message channel contents a | Cto1-3 external control lines 1-3. these three bit, Ab8-11 source channel address bits 8-11. these bit, Ab7-0 source channel address bits. in timing modes, In timing mode 4, these 8 bits are used along with, If message mode is selected at tpcm high bits, the, Preliminary information | Mitel DISTRIBUTED HYPERCHANNEL MT90840 User Manual | Page 29 / 50 Oe/cto0 output enable. provides per channel trista, Ppby parallel port bypass enable. indicates that t, Mc message channel. the message channel contents a | Cto1-3 external control lines 1-3. these three bit, Ab8-11 source channel address bits 8-11. these bit, Ab7-0 source channel address bits. in timing modes, In timing mode 4, these 8 bits are used along with, If message mode is selected at tpcm high bits, the, Preliminary information | Mitel DISTRIBUTED HYPERCHANNEL MT90840 User Manual | Page 29 / 50