Garland H280 - Manual

07/19/07 P/N 4522555 Page 1
H280-series Valve Overheat / Relocation Kit Instructions: Standard Oven
Instructions for Applying Kit #4522559
This kit is for a Standard 36” oven only. For convection RC 36” oven, use Kit #4522368
Installation Prerequisites:
•
U-Burner with no welded bracket
• Baso Valve with flex tube connection to pilot
Tools Needed:
•
Wrenches
• Small Hacksaw (for extension installation if required, See Step 12)
• Screwdrivers (Robertson, Flat)
• Riveter
Parts:
Part # Description Quantity
1415703 Baso Safety Valve 1
4522554 7/16” x 10” Flex Tube 2
4522558 Pre-bent 3/16” Tubing 1
076050-89 3/16” Union 1
M231 Nut (from Baso Valve) 2
M126 Ferrule (from Baso Valve) 2
1095499 7/16cc – 3/8 NPT Straight Connector 2
4522557 Valve Bracket 1
F60 10 x 5/8 Sheet Metal Screw 4
M123 Nut (for Flex Tube end) 2
M122 Ferrule (for Flex Tube end) 2
F312 Nut (for Baso Valve) 1
F587 Bolt (for Baso Valve) 1
4522556 Redesigned Kick Panel 1
4522201 Welded Bracket Oven Burner 1
F32 #10-24 x ½ Pan HD Type F Screw (For Pilot Bracket) 1
G0635-1 2 C-2 Pilot Natural Gas 1
G0635-2 2 C-2 Pilot LP Gas 1
M124 ¼ Tubing Ferrule 1
M125 ¼” Comp. Nut 1
1415000 Robertshaw Thermocouple 1
4521446 ¼” x 12” Flex Tube 1
7227-1 Lighting Instructions 1
M121 Rivet 2