Graco 2L02VIB - Manual (Page 5)

It is VERY IMPORTANT to test the system when first set up, and at regular
times thereafter. Test the units if you suspect they may have been damaged or have
not been used for a long time.
1. If two adults are present, have one take the Parent Units to different locations, trying
various volume settings, while the other speaks into the Nursery Unit.
2. If only one adult is available, place a ticking clock, radio, or other sound-producing
device near the Nursery Unit to test it.
3. When testing, keep the level of your child’s sounds in mind, and adjust the volume
accordingly.
4. If there is sound interference, switch the Nursery Unit and the Parent Units to the other
channel setting.
Operation
To Listen To Baby
• Turn on Nursery Unit using the ON/OFF switch.
• Turn on Parent Unit using the Power/Volume wheel.
• Adjust the volume on the Parent Unit by turning the Power/Volume wheel.
• The Sound Lights on the Parent Unit will illuminate as your child (or other
objects) make noise near the Nursery Unit. Please note that the Sound Lights
and
volume control on the Parent Unit are independent of each other. With the
volume turned all the way down, the Sound Lights will still illuminate as your child (or
other objects) make noise near the Nursery Unit.
Testing the System
5
• To turn on the Vibration Alert Feature, set the switch on the
side of the parent unit to ON.
Vibration Alert Feature
•To turn on NightLight slide button on side of Nursery Unit up.
NightLight Feature