Table 3, 9140 controller communications commands continued – Fluke 9140 Dry-well Calibrator User Manual

Page 42

8 Digital Communication Interface

Interface Commands

Command Description

Command
Format

Command
Example

Returned

Returned
Example

Acceptable
Values

Set serial linefeed mode:

lf[eed]=on/of[f]

ON or OFF

Set serial linefeed mode to on

lf[eed]=on

lf=on

Set serial linefeed mode to off

lf[eed]=of[f]

lf=of

Miscellaneous Other Commands

Read firmware version number

*ver[sion]

*ver

ver.9999,9.99

ver.9140,1.21

Read structure of all commands

h[elp]

list of commands

Read ALL operating parameters

all

list of parameters

Legend:

[] Optional Command data

{} Returns either information

n Numeric data supplied by user

9 Numeric data returned to user

x Character data returned to user

Note:

When DUPLEX is set to FULL and a command is sent to READ, the command is returned followed by a
carriage return and linefeed. Then the value is returned as indicated in the RETURNED column.

Table 3 9140 controller communications commands continued