innovaphone myPBX Version 11 R1 - Manual (Page 8)

Operating manual: innovaphone myPBX
Page 8 / 25
By pressing close you can mask out the numerical pad.
Conference
For a conference call you need two calls, an active call and a call on hold.
Click on the conference icon in the call-on-hold’s contact information. All three subscribers
are now connected.
To terminate the conference, click on the Hold icon in one of the two contact fields. The
conference terminates and this connection’s subscriber is on hold. The other subscriber is
connected to you. You are now in the same mode as before the conference call.
You can also terminate the conference by pressing the red handset icon. After terminating
the first call, you are still connected to the other party until you also terminate this
connection.
Please note: If you ring off on your phone, the other two subscribers stay connected.
Call diversions
You can configure your own call diversion with myPBX. Pull the slider that is used for the
configuration at the left-hand side of the message area forwards.