Aervoe Thermoelectric Cooler - Manual (Page 3)

FEATURES
The Thermoelectric Cooler/Warmer keeps food and drinks cold without ice or meals warm
just by plugging it into your vehicle’s 12V power outlet. Its 25 qt. capacity is large enough
to hold 31 - 12 oz. soda cans, 15 - 16.9 oz. water bottles, or 5 - 2L soda bottles. Comes
with a vertical divider that will keep heavier items from softer items. The ideal companion
for long haul trucking, recreation, on the job, or emergency preparedness.
OPERATION
Designed to be directly connected to vehicles, generator or other 12V type power supply.
Can be powered from 120V AC Power Outlets when used with Max Burton #6993 200W
Converter, available at your retailer or www.aervoe.com.
IMPORTANT: For optimum efficiency and to avoid vehicle battery drain, keep the vehicle
running during operation. 12V vehicle or other power supply must provide for at least 6A
output during operation.
Cooler Mode:
1. In cool mode the temperature will drop approximately 30°F (17°C) below the ambient
temperature of the room or area in which it is located. The cooler is not intended to
freeze food or liquid.
2. Typical cooling times from 75°F (24°C) ambient to 45°F (7°C) inside temperature
is 1-3 hours depending on the quantity of items inside. Maximum lowest inside
temperature is 38°F (3°C). Sealed Ice packs can be used to assist the cooling function.
In ambient temperatures above 100°F (38°C) the cooling function is not efficient.
3. Unlatch the lid by flipping the handle to the front. Lift the lid to open. The lid can be
completely removed for easy loading by pulling it off of the base.
4. Place your perishable food or beverages inside the COOLER/WARMER
COMPARTMENT without blocking the cooling fan or vents. Place the top cover back on
the base if it was removed and lock the handle into position by flipping it vertical or to
the back.
5. Connect the 12V DC POWER CORD into a compatible 12V DC vehicle power socket or
other 12V receptacle.
6. Place the COOL/OFF/HOT switch in the COOL position. Verify the POWER INDICATOR
next to the MODE SWITCH illuminates GREEN. The COOLING FAN and thermoelectric
modules should make a humming noise. It is normal for the Cooling Fan to cycle on
and off during operation.
7. Keep the lid closed when in use and disconnect from power supply when not in use.
IMPORTANT: Do not abruptly switch between COLD and HOT during operation. First
switch to OFF (O) and wait at least 15-minutes before changing to another operation.
Warmer Mode:
1. Warms foods and beverages to maximum inner temperature of 120°F (49°C). Actual
temperature of contents and time to warm will very depending on items inside.
2. Unlatch the lid by flipping the handle to the front. Lift the lid to open. The lid can be
completely removed for easy loading by pulling it off of the base.
3. Place your items inside the COOLER/WARMER COMPARTMENT and avoid blocking
the cooling fan or vents. Place the top cover back on the base if it was removed and
lock the handle into position by flipping it vertical or to the back.