Xerox DocuColor 1632-5218 - Manual (Page 66)

1–60
U S E R G U I D E (C O P I E R )
Selecting Separators + N Sets
1
On the Output Format tab select Transparency Separators.
2
Select Separators + N Sets.
3
Select Paper Tray Settings.
4
Select the size/orientation of the transparencies loaded in Paper
Tray 5.
5
Select the paper tray to use for the Separators and N sets.
6
Select Save.
7
Select Start to make copies or Save to select additional features.
NOTE: Transparency Separators cannot be used with the following
features: Uncollated, Reduce/Enlarge, Covers, Booklet Creation,
Book Duplex, and 2-Sided output.