Xerox DocuColor 1632-5218 - Manual (Page 47)

USER GUIDE (COPIER)
1–41
U S E R G U I D E (C O P I E R )
Stapling
This section describes the procedure for programming the Output
feature to staple output. You must have a Finisher (optional
accessory) to staple output.
1
On the Added Features tab select Output.
2
Select Collated/Stapling.
3
Select Stapling. The Stapling screen is displayed.
4
Select the desired stapling position.
The Finisher Tray is automatically selected as the Output
Destination.
5
Select the desired Original Orientation:
• Head to Top
• Head to Left
Select Save.
6
Select Start to make copies or Save to select additional features.