HP Remote Insight Lights-Out Edition II Board - Manual (Page 166)

Scripting, command line, and utility options 166
Example:
GET_VF_STATUS Parameters
There are no parameters for this command.
GET_VF_STATUS Runtime Errors
There are no errors for this command.
GET_VF_STATUS Return Messages
The following information is returned within the response:
BOOT_OPTION = BOOT_ALWAYS | BOOT_ONCE | NO_BOOT
WRITE_PROTECT_FLAG = YES | NO
IMAGE_INSERTED = YES | NO
SET_VF_STATUS
The SET_VF_STATUS command sets the Virtual Floppy Drive status on the RILOE II. The SET_VF_STATUS
command must be displayed within a RIB_INFO element, and RIB_INFO must be in write mode. All the
parameters in the command are optional. The user must be logged in with virtual media privilege to
execute this command.
Example:
SET_VF_STATUS Parameters
VF_BOOT_OPTION specifies the boot option parameter for the Virtual Floppy. The possible values are
"BOOT_ALWAYS", "BOOT_ONCE", or "NO_BOOT." The value is case sensitive.
VF_WRITE_PROTECT sets the write-protect flag value for the Virtual Floppy. The possible values are "Yes"
or "No."