Proface AGP3500 - 10.4 DIO HMI" - Manual (Page 11)

Installation Procedure
PLC Ladder Monitor Operation Manual 1-4
1.3 Installation Procedure
• GP-Pro EX Manual and the Hardware Manual are available for download on
the Pro-face support site “Otasuke Pro!” (http://www.pro-face.com/otasuke/).
See the manual for GP-Pro EX Ver.2.00 or later.
Create a project file
Install the startup file
onto a CF Card
1 Install the add-on kit
2 )
“2.2.2 Setup Procedure” (page 2-4)
3
See: GP-Pro EX Reference Manual
4
Configure the
device monitor )
“2.2.2 Setup Procedure” (page 2-4)
5
Transfer the project
file with the device
monitor settings to
the display
See: GP-Pro EX Reference Manual
6
Install the CF Card See: GP3000 Series Hardware Manual
7
Connect the display
and PLC
See: “Mitsubishi Electric Corporation A Series CPU Direct Driver”
or “Mitsubishi Electric Corporation A/AnA Series Ethernet
Driver” in “GP-Pro EX Device Connection Manual”
)
“2.2.2 Setup Procedure” (page 2-4)
8 Start up the Ladder
Monitor feature )
“2.2.2 Setup Procedure” (page 2-4)