2 ring tone pattern selection, Description, Conditions – Peerless Industries KX-TDA15 User Manual
Page 37
1.1 Incoming Call Features
Feature Guide
37
1.1.3.2
Ring Tone Pattern Selection
Description
A ring tone pattern can be selected for each incoming call type on a Ring Tone Pattern Table
basis, which can be assigned for each extension.
[Ring Tone Patterns]
[Programming Example of Ring Tone Pattern Table]
There are a specified number of programmable tables each of which allows the assignment of
ring tone patterns for the following incoming call types:
For trunk calls (including trunk call hold recalls) and doorphone calls, select ring tone patterns
on a trunk group or a doorphone port basis.
Each extension can select one of the tables.
Conditions
•
"
PT Ring off Setting
" can be enabled or disabled through system programming. If
disabled, PT users cannot set the ring off.
Table
No.
Intercom
Call/Hold
Recall
Trunk Call/Hold
Recall
Doorphone Call
Timed
Reminder
Call
Back
LCS
TRG1
TRG2
...
Port 1
Port 2
...
1
Double
Single
Single
2
Single
Double
Double
:
:
:
:
:
:
:
:
:
:
:
1 280 ms
Single
Double
Triple
S-Double