Intellinet Network Solutions UNC-W10 - Manual (Page 42)

WIRELESS NETWORK IP CAMERA User’s Guide
Wireless Network IP Camera is to be connected under Infrastructure mode. Your PC/ Notebook’s
encryption code also needs to be setup the same with the Wireless Internet Camera’s encryption
code under either Infrastructure mode or Ad-hoc mode.
The default setting for the Encryption Key is “Disable” therefore, to secure the wireless
transmission be sure to Enable the Encryption Key by entering the relevant data.
41
NOTE
Carefully input Encryption Code, any error setting will cause communication link to fail
IMPORTANT
Infrastructure Mode :
An 802.11 networking framework in which devices communicate with each other by first going
through an Access Point (AP). In infrastructure mode, wireless devices can communicate with
each other or can communicate with a wired network. When one AP is connected to wired network