FIC A360 - Manual (Page 58)

Software Functional Overview
FIC A360 Service Manual
3-1
Chapter
3
3.1 Overview
The A360 is an IBM PC/AT compatible Notebook PC which support the Intel’s FC-PGA
processors family. The following are the major features that A360 supports:
• Microsoft PC99 logo and WinME Logo approval.
• Offer 800x600 SVGA display with 12.1” LCD panel
• Offer 1024x768 XGA display with 13.3” LCD panel
• Offer 1024x768 XGA display with 14.1” LCD panel
• Support ACPI 1.0B (or above)
• Support PCI 2.1 (or above)
• Support AGP 2.0.
• Support SMBIOS 2.3
• Support PC-100/133 SDRAM
• Support 100/133 MHz CPU front side bus.
• Support a proprietary Port Replicator
3.2 Summary of the BIOS Specification
Below is the summary of the BIOS software specification:
Controller Chip Description
BIOS Feature Microsoft PC99 logo and WinME Logo approval.
Support Boot Block / Crisis Rescue
Support ACPI 1.0B (or above)
Support PCI 2.1 (or above) Spec
Support SMBIOS 2.3
Support AGP 2.0.
Support Windows 98 SE, Windows 2000 and Windows ME.
Support flash function including both DOS and Windows
interface for new BIOS update.
Support 3 Mode FDD.
Support 4 different keyboards on same BIOS
Support boot from FDD, HDD,CDROM and LAN Drive
Support Quick Boot ( 10 Seconds )
CPU Auto detect the CPU type and speed for Intel Pentium III based
system
DRAM Auto sizing and detection. Support PC-100/133 SDRAM.
Cache Level 2 SRAM auto sizing and detection
Always enable CPU L1 and L2 cache
Shadow Always enable VGA and System BIOS shadow
Display System auto detects LCD or CRT presence on boot and lid
closed