Freecom Technologies MusicPal - Manual (Page 64)

6
Freecom MusicPal
EN
.1. Accessing your MusicPal web interface
When you click this menu item, the web interface of your MusicPal opens in your default
browser.
.1. Start recovery procedure
This procedure can reset and repair an MusicPal to factory default settings if you cannot
access your MusicPal anymore. Your user data will not be deleted!
To restore your settings, please proceed as follows:
a) Enable the Recovery mode by clicking 'Start the recovery procedure' in the Freecom
Network Storage Assistant.
b) Unplug the MusicPal's AC power pack.
c) Keep the 'Menu' button pressed down and reattach the AC power supply.
d) Release the 'Menu' button after 1 second.
e) When a message appears on the Freecom Network Storage Assistant telling you that
the recovery is finished, click on „OK".