Fujitsu Siemens Computers SPARC Enterprise M8000 - Manual (Page 87)

Chapter 3 DR User Interface 3-25
3.2 Command Reference
This section lists the DR commands and other commands related to DR.
For details of the commands, refer to SPARC Enterprise M4000/M5000/M8000/M9000
Servers XSCF Reference Manual. For the DR commands, see
Section 3.1, “How To Use
the DR User Interface” on page 3-1 .
Note – (Note 1) Use of each command is restricted to selected administrators only. To use
each command, you must have appropriate administrator privileges. For details, refer to
SPARC Enterprise M4000/M5000/M8000/M9000 Servers XSCF Reference Manual.
Note – (Note 2) This section does not list all commands related to DR. For other DR-related
commands, refer to SPARC Enterprise M4000/M5000/M8000/M9000 Servers XSCF Reference
Manual.
TABLE 3-16 DR Display Commands
Command name Function
showdcl Displays the DCL and the domain status.
showdomainstatus Displays domain status.
showboards Displays system board information.
showdevices Displays information about the CPUs, memory, and I/O devices on
system boards.
showfru Displays PSB configuration information.
TABLE 3-17 DR Operation Commands
Command name Function
setdcl Updates and edits the DCL.
setupfru Sets the division type and memory mirror mode for PSB.
addboard Adds a system board into a domain.
deleteboard Deletes a system board from a domain.
moveboard Moves a system board between domains.